fbpx

Dosing Pumps

Athena AM3 60 GPD

The AFT Athena AM3 dosing pump is manufactured to the highest quality standards that guarantee its durability, reliability and performance. Its maximum pressure is the highest in its range and It has Dual Voltage with automatic selection. Due to its materials, it is the ideal option for the exact dosage of a wide variety of chemicals.

Applications

  • Water purification
  • Dosage in Industry and Agroindustry
  • Cooling Towers
  • Dosage of Disinfectants, Flocculants and Additives
  • Agricultural dosage
  • Reverse Osmosis

Value Atributes

  • Dual Voltage Automatic Selection 115-230 VAC 60/50 Hz.
  • Adjustable Flow from 60 to 110 GPD (416 lpd)
    Maximum Pressure 230 PSI (16 bar)
  • Injection Tip Included
  • Level Probe Port, Digital and Analog Signal

Conformitée European

Athena M3 - Technical Sheet

AFT - Dosing Pumps Quick Guide

AFT - Dosing Pumps Chemical Resistance Chart

AFT - Dosing Pumps Product Catalogue

Category:

Description

Hydraulic Features

  • PVDF Head: Resistant to a wide variety of chemicals used in industry, water treatment and water treatment.
  • Ceramic Ball Checks: Reliability of the two-location and chemical compatibility.
  • PTFE Diaphragm: Resistance and compatibility with all chemicals.
  • Manual purge valve.
  • Adjustable flow rate with adjustment from the front panel.
    • Up to 110 GPD x 20 PSI (420 LPD to 1.4 bar)
    • Maximum Operating Pressure: 230 PSI (16 bar)

Electrical Features

  • Constant dosing: Dual stabilized power supply 100 – 240 Vac 50/60 Hz with low power consumption.
  • Power-ON and LED level alarm.
  • IP65 protection

Proportional:

  • To a digital signal (pulse-emitting counter) with the possibility of multiplying or dividing the received pulses (4:1 – 1:1 – 10:1 – 1xN).
  • To an analog signal (4-20 mA) with the possibility of regulating in percentage the maximum manual flow regulation flow rate 0-100

Additional Accesories

AFT dosing pumps have 2 additional accessories that can be of benefit to the user in different applications. These accessories are optional, they do not affect the operation of the equipment.

Level Sensor

Protects the AFT dispenser from dry work.
The moment our tank runs out of solution, the Level Sensor turns off the dosing pump through a dry contact so that it does not operate without liquid.

Back Pressure Antisiphon Valve

Avoid accidental emptying of our solution and there is some product loss.

  • Use for Antisiphon (Red): 0 – 260 PSI (0 to 18 bar)
  • Use for Back Pressure (Yellow): 0 – 73 PSI (0 to 5 bar)

It is installed directly at the exit of the kopkit (Download).